MAKE SELECTION FROM DROP DOWN MENU BELOW
These 3D Files were constructed from our popular Grand Concert 12-Fret Florentine Guitar Plan files and 2D CNC files that we have in the plan section of our site. You will find that these files will provide a top level of convenience to customers who possess a CNC router, or access to CNC routing services.
We offer our Grand Concert 12-Fret Florentine files either as a complete set or individual pieces (6) pieces total. if you don’t need the entire guitar. For instance if you only want the Neck, you can purchase the files to mill the neck.
Unsure if these files will work on your CNC system? Download our free Gibson Mustache Bridge 3D CNC files to be sure. Download HERE.
Note that all hardware including tuners, frets, purfling, bindings, screws, truss rod, tail block, sides and side braces are not a part of these files and are shown for illustration purposes.
All these 3D CNC files are formatted in STEP format (Standard for the Exchange of Product Data). Most 3D CNC controller software should handle this popular formatting. We are now including STL (Stereolithography) files with all file sets.
The available files are detailed below:
1. The top plate is contoured to the proper shape with soundhole and cutaway. Complete top brace set is provided complete with scalloping and rounding contours. Bridge plate and fretboard side pieces are also provided. Note: Top does not include any geometry for bindings, purfling or soundhole trim.
This file will give you a smooth 3D file of the neck contour, heel contour, mortise and tenon joint attachment to the headblock, complete peg head contour, tuner holes, bushing recesses, truss rod channel and access in the head block. Also included is the headpiece trim, MOP inlays and the head and tail blocks.
This file will contain the proper fretboard outline perimeter, fretboard radius (16") fretboard recesses for the MOP Inlays and fret slots for the proper scale. (.023"; .58mm wide). Fret tops and tangs are included only for clarity as separate layers.
This file contains the Pickguard outline and bevel and the optional Armrest outline and bevel.
This file contains the Taylor Type Belly Bridge, complete with side ramps, saddle channel and saddle, bridge pin hole and recesses.
For a reduced price you will receive all the above files.
Refer to our 3D CNC Faq Sheet for detailed information of these files. Also, if you are new to CNC routing check out our page on CNC Routing for Beginners for information and helpful videos.
Note that the photos on this page are actual rendered images from these files. All Hardware, including Electronics, bridges, tuners, knobs, screws etc. are not included as part of these files. These files are digital only.
**GenOne Luthier Supply is not affiliated with any guitar manufacturer, nor are our plans exact replicas of any guitar**
