Hardware Package for Heated Side Bender-Ukulele

General Information:

If you are having trouble finding the hardware for our Heated Side Bender, this kit will be for you. We supply you with all the springs, screws, press screw, U bolts etc., so you don't have to go to multiple hardware stores and big box stores.

All you have to supply is the plywood parts. The hardware kit will allow you to complete the bender and get you up and operating on bending your tonewood. (Note: customer needs to drill (2) 1/8" holes in Press Screw Foot.)oka Use a metal cutting bit and small amount of oil to ease cutting. The foot is cast iron so it cuts easily.

The specs tab details all the parts you will receive for your kit.

Did you purchase our Plan, Heated Side Bender for Guitar? If not CLICK HERE to go to the sales page.

Note: All Hardware Packages Only Available to USA Customers - All 50 States. Photo depicts Guitar Hardware Kit. Ukulele Hardware is slightly different as indicated in Specifications Below.

If you wish to have hardware for a 6" wide Ukulele Bender, send us a note at checkout and we will substitute a 10" Aluminum Retainer in lieu of a 8" Aluminum Retainer.

Specifications:

• 12" or 8" Press Screw depending on availablity.
• (4) 7/8” x 6”x .091” Extension Springs For Waist and Side-End Retainers
• (4) 7/8" x 3.5"x .091  Extension Springs For Waist and Side-End Retainers
• (6) 1/4” x 1-1/4” U-Bolts for Extension Spring Attachment To The Bender - Zinc Plated
• (4) 5/16” 1-1/4” Carriage Bolt, washer & nut Assemblies
• #8 X 1-5/8” Assembly Screws For Attachment Of All Wood Bender Parts
• #10 x 3/4” Sheet Metal Screws
• (2) 5/16” x 2-1/2” Carriage Bolt, Nut & Washer Assemblies For Variable Waist Retainer - Zinc Plated
• Preformed 1/4" x 1" x 8" Aluminum Bar For Waist Retainer
• (4) Rubber Feet & Screws