Florentine Bender Attachment 3D CNC

$119.95
  • Description

    General Information:

    These 3D Files were constructed from our Florentine Bender - Guitar that we have in the Luthier Tool Plans section of our site. You will find that these files will provide a top level of convenience to customers who possess a CNC router, or access to CNC routing services.

    This bender allows you to accurately bend the side for the florentine cutaway, which is a very beautiful addition to your build. In order to use this bender follow the procedure detailed below:

    Bending Procedure:

    Bend the side on the standard form insert. The lower bout retainer should be completely bent as normal. The Upper Bout should only be bent about 1/2 to 2/3 around the curvature of the upper bout. 

    Remove the bend side after a few days. Cut off the side slightly longer than the point of the cutaway. 

    Place the Florentine Bender with the approprite radius into the side bending machine. Note that the base of the Florentine Bender screws down the to bender without making an modifications. The Upper Portion of the Florentine Bender slips onto the 3/8" Plywood of the Waist Retainer. Bolt into place.

    Make your sandwich into the sandwich and make sure the grain pattern is correctly aligned with the guitar side. Bend the side by using the press screw and seat the sandwich fully into the receiving half of the bender.

     

    The file you will receive is as follows

    Florentinebender3dcnc.stl: which is the file for all the 3/4" or 19mm plywood parts

    Unsure if these files will work on your CNC system? Download our free Gibson Mustache Bridge 3D CNC files to be sure. Download HERE.

    Note that all hardware including, bolts, knobs , and all other metal parts, are not a part of these files and are shown for illustration purposes.

    All these 3D CNC files are formatted in STL format (Stereolithography) Most 3D CNC controller software should handle this popular formatting. Check with your software provider if you are unsure of this.

    We recommend that you purchase the PDF plans Florentine Bender - Guitar to give details of construction for these model files.

    Refer to our 3D CNC Faq Sheet for detailed information of these files. Also, if you are new to CNC routing check out our page on CNC Routing for Beginners for information and helpful videos.

    Note that the photos on this page are actual rendered images from these files. These files are digital download only.

MAKE SELECTION FROM DROP DOWN MENU BELOW

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)